Preserving from the Garden

Advertisements

Green Beans

First, I wash my beans. I then shake them dry or dry them on a paper towel. I cut both ends off my green beans, then cutting the beans into two or three pieces. I transfer those pieces into a gallon freezer bag, use the water displacement method to remove extra air, then I label with item month and year, then I freeze. I have already done two large harvests this month and was able to fill this bag in just 2 weeks. I planted 12 green bean vines.

To do the water displacement method, fill a large bowl or pot with water. Seal your bag 3/4 of the way and remember the edge that is open. Begin submerging the bag into the water. Leave out the edge that is open, and once most air is removed, seal the rest of the bag. You can then flatten out the contents of the bag for easy storage.

Onions

When I harvested all my onions, I first had to let them dry out. So, I stored them in this container on my kitchen windowsill. The windowsill gets pretty warm but it doesn’t get much sun, just a bit when it’s setting, and it’s not very strong that time of day. Once the tops all browned, I began preserving. If you have a root cellar, you can chop off the tops just above the stem, and clean off the roots, then they can immediately go into storage. If you don’t have a dry space under ground like me, then you can simply dice them and place them in the freezer for future use. I got two full sandwich bags, and I have used them heavily before processing the last of them. I once again used water displacement method to remove air.

Carrots

Carrots can lose nutrients if you pick them and leave the tops on in hot weather. So, our harvest was in two batches. We emptied a bin, took the carrots inside. Cut the tops from the carrots. then repeated with the second batch. Once all the carrots were harvested, I scrubbed them to remove dirt and the roots. Once all were processed, I cut off the tops and the end of the root, then I sliced then and transferred them to gallon freezer bag. I then used water displacement to remove the air, labeled them, then added them to my freezer.

Tomatoes

My tomatoes were starting to go bad, and since I haven’t had any more to harvest lately, I figured one small canner of tomatoes was better than nothing for now. You aren’t supposed to use rotting or damaged tomatoes, however that is how my family has done it for generations. First, cut off any bad spots deep into the tomato. Sanitize your knife and the spots. Then treat them like normal tomatoes. Drop the tomatoes into boiling water, boil for 1-2 minutes, then transfer into an ice bath. After a minute or so, the skin will loosen from the fruit. Remove a tomato and place on a cutting board. Cut off the top stem then peel off the skin. Dice your tomatoes then add to a preheated jar. (I just soak them in very hot water.) Fill your canner 1/2 way with water and bring to a boil. Also bring a small saucepan of water to a boil, then add the needed number of lids and remove from heat. Push down on the tomatoes and add any extra juice from your dicing. Once near to the top, you need to add Lemon juice and salt. For a Quart add 2 Tbsp lemon and 2 tsp salt, and for a pint, add 1 Tbsp lemon and 1 tsp salt. Add more tomatoes/some very hot water to get to 1/2 inch from the upper lip of the jar. You will then need to stick a butter knife down the edges of the jar to remove air pockets. Then you can wipe the rim clean, add the lid and ring, finger tight, then once all are ready, add them to your water bath, add additional water to cover the jars, bring that to a boil, the process for 85 minutes. Once they are done, carefully remove hot jars and place on several towels on the counter, and let cool to room temperature. Check the tops to see if they sealed, remove the rings, wipe down the jars and label, then store in a dark and cool location for the most available storage time.

One Year Update

Listing Photos

It all started with my Starting Point post. There I wrote my initial thoughts and ideas for this house as recorded last November. We bought this house and found many things wrong with it. We starting putting work into the house starting last October/November, and below is what we were able to accomplish so far.

Current Progress

As you can see just between the first set of photos and the second, we’ve made some big changes. We removes trees and bushes, put in raised beds, added an exterior door on the garage, and changed the accent color on the house from red to teal. Inside, we removed a lot of the latex paint off the utility room walls, we built and removed our builtin pantry, and installed a storage shelf instead. We removed the broken dishwasher and sealed the space to be used for my canning stuff. We also upgraded the light in the kitchen, painted cabinets, remove the old range microwave and added a new range-hood, as well as replaced the old leaking kitchen faucet. In the dining room, we refinished the wall after removing about 1/3 of the wallpaper in the house, and we also created a lampshade for our single handing bulb from a lantern we used at our wedding reception. We haven’t done too much to the living room yet; we added a projector screen and are mainly using it for storing some of our extra stuff until we finish the master bedroom. We replaced the light fixture in the hall, and upgraded all the light switches in the house to the rocker style. We repainted the bathroom, removed the medicine cabinet, changed the light fixture, and painted the vanity and changed the hardware. We also added a new shower curtain to match. In the original green room, due to it’s carpet color, we originally replaced the floor in the closet with vinyl planking. After seeing how easy it was, we took on the task of redoing the entire rooms floor, which was not an easy task. we remove the wood from the closet to be replaced with matching floor eventually, I also painted the bedroom the two shades of orange, we moved in, and that is the state of our orange room. Finally, our current project is the master bedroom, or our new green room. We just finished laying the flooring on Saturday. There is still a lot of work we want to do in that room before the new unveiling, but I hope this helps build some excitement for the next unveiling, which will be coming in the next two weeks or so.

A Year’s Worth of Projects

A year is so long, yet so short. We were able to accomplish so much because of the blessing we’ve received this year and from taking things in stride. We are happy for our new experiences and are content with this house even as we continue to find more problems. We aren’t sure if we’ll keep this house forever, but we are happy for all the good things this house is providing for us. This Lustron gives my husband and I something to do together, to bond over, and to dream for. We hope for nothing but the best for this house in the future, and we hope our fingerprint on this house improves the beauty of this old Lustron, rather than hinders it’s potential.

For more on our home improvement posts from this year, feel free to check out any of this posts below. If not, I’ll see you again soon!

Starting Point

New Light Fixtures

New Kitchen Faucet

Update and Mistakes

DIY Hidden Pantry

New Dining Room Light

Removing Wallpaper

Closet Work

Bathroom Transformation

Dishwasher to Storage

Kitchen Cabinet Updating

Raised Beds

New Kitchen Vent Hood

A New Big Project: Laminate Plank Flooring

Green Room Flooring

Finishing Our Guest Room

New Kitchen Shelf

New Kitchen Shelf

If you’ve been following me for a while, you may remember my post back in January or February about my DIY Hidden Pantry. This pantry was very helpful, and very convenient, however over time, the screws began to pull from the wall since we didn’t use drywall anchors. Also, the pantry was too small for all the snack foods I had and needed to store. We eventually began to store bags of chips on the fridge just because they wouldn’t fit in the space anymore.

Josh and I want to eventually put in built in cabinets around the fridge, however, we want to see how we can use our space in the meantime. So, we decided to get a shelf from target, and if it’s very useful, we’ll eventually add doors, or install all built ins. With built ins, we hope to also re-arrange our washer & dryer, but one step at a time.

The shelf we got is the 5 shelf bookcase from target, and we picked the color black. It was easy assembly, and gave us so much more space. Each shelf holds 30 pounds, and the shelf is shallow enough to not interfere with the dryer door.

DIY Hidden Pantry

The Idea

Josh has put a lot of time and energy thinking about how to do this project. He had leftover wheels from a long board he had, and we have some space between the fridge and an existing wall, so he thought this would be a nice thing he could build that would look nice and provide us with additional kitchen storage. We have an 8 1/2 inch gap that is 18 inches deep, and 63 inches until the back would hit an existing bracket on the wall, but 66 inches in the front to be level with the fridge.

The Space and Materials

For this project, we needed 3 1″x8″x8′, 12 3/8″ dowels that were 48″ long, and a set of 18″ Full extension drawer slides. We picked up the materials as home depot paying just under $14 per board, under $1 per dowel, and under $15 for the drawer slides.
We then cut the one board to 63″ for the back board, 65″ for the face board, and we cut 6 shelves at 16″ each. Josh also created a jig to help us pre-drill holes in the end of each shelf, so that when we add screws we didn’t split the wood. We also had to cut our dowels, which we cut to 18″, and drill holes for the wheels to mount. After drilling all of that, we also pre-drilled holes in the face and back, and drilled holes for the dowels to fit. Then we were on to assembly.

The Assembly

We assembled the shelves by making the slightly longest be on the bottom, and getting smaller as they go to the top. After drilling all the holes, we added wood glue to each end of the shelf and began screwing it together. When you make it, glue and screw into the face board, and once it’s dried, then attach the back. Though we predrilled holes, we still split a shelf, and we attached the back before the front, so the back is square while the front is sloped (oh well).

We attache the wheels by centering them and using screws to mount them to the board, and not the nuts and bolts that come with boards. And, for the dowels, we slipped them through the holes. The holes we were using were tight, so we didn’t, but you can also add glue here if they are loose.

Finalizing

To finish the project, I used wood putty to cover the screw heads and dowel ends, and let it dry for 4 hours as directed by the package. I then sanded the surface flat by hand. Finally, I painted the face of the cabinet with semi-gloss white paint. I had to use 2 coats, and finally, we drilled 2 holes at our desired height and attached a handle we got at Ollie’s.

Update and Mistakes

Josh and I have been working on multiple big projects since Christmas. We’ve been working to get a bit more DIY content on the blog, but we’ve found it’s just a little too hard to do some of these projects in winter.

We’ve pulled out our old dishwasher, since it stopped working mid-November, and though we would like another one eventually, we just don’t have the money or the options at this point to get another one, even used. So, we’re trying to come up with a plan for the now hole under our cabinets. We’ve also been working on a hidden roll out pantry. We started this project on the First, but we’ve been delayed a bit and it’s been taking a few days to finish it up, but hopefully, it will be up by Friday, fingers crossed! Finally, our big mistake.

We’ve been working on removing wallpaper for a few weeks now. But, there is a spot where they plastered over wallpaper, so we decided sanding would be the best option. So, last night we decided to sand down the wall, and though it looks great now, I think I’m going to go crazy with how much plaster dust is covering EVERYTHING! I’ve seen some forums talking about this problem and they encourage washing all fabrics and wet wiping down all surfaces, but man! It’s so much! So, if you ever attack a project like this, please, wear face masks (we did that atleast), make sure the room is well ventilated and sealed off from other rooms if possible, and try not to get frustrated with the mess you just made!

Website Powered by WordPress.com.

Up ↑

Design a site like this with WordPress.com
Get started